Publicité
Les langues disponibles
Les langues disponibles
1.
Attach each front bracket to outer-
most set of holes with 2 screws.
Front brackets
from kit.
DRAWER
1. Determine your appliance type (washer or dryer) according to column
1 in table below.
2. Orient rear brackets according to column 2 for your particular model.
3. Attach each bracket with 2 screws through the holes that line up on
pedestal.
1 - Appliance
2 - Rear bracket orientation
* Each pedestal has slots in the rear marked "1", "2"
and "3".
® Each rear bracket also has 2 arrows
indicating
bracket direction when mounted on the pedestal.
DIRECTION
INDICATOR
ARROWS
Publicité
