Leckey sleepform 1 Mode D'emploi page 15

Daily Product Inspection
(Therapists, parents & carers)
We recommend that daily visual checks of
the equipment are carried out by therapists,
carers or parents to ensure the product is safe
for use. The recommended daily checks are
detailed below.
1. Check that the product is clean and there are
no signs of soiling.
2. Check that all fabrics, webbing, Velcro and
plastic buckles are in good condition and do not
show signs of wear and tear or fraying.
3. Check the sleepform mattress is air tight; by
extracting the air and does not loose its shape
after the valve has been closed.
4. Check the Sleepform mattress for
scratches,scores or punctures. Seal any holes
with the repair patches supplied with
the product.
Holes can be found by visual inspection or by
covering the surface of the pillow with soapy
water and watching for air bubbles.
If a hole has been found clean the area and
let it dry.
Select a patch and put glue on it and on the area
around the hole.
Wait for 2 minutes and firmly press the patch
over the hole ensuring that no air remains under
the patch.
The bond will be complete after 24 hours.
DO NOT FULLY IMMERSE THE SLEEPFORM
MATTRESS.
Annual Product Inspection
(Therapist, Technician,
Leckey Product Advisor, Dealer)
Leckey recommend that each product should
be subject to a detail inspection at least one
a year and every time the product is reissued
for use. This inspection should be carried out
by a technically competent person who has
been trained in the use of the product and
should include the following checks as a
minimum requirement.
1. Check that the product is clean and there are
no signs of soiling.
2. Check that all fabrics, webbing, Velcro and
plastic buckles are in good condition and do not
show signs of wear and tear or fraying.
3. Check that all buckles lock securely when
clipped together.
4. Check the sleepform mattress is air tight; by
extracting the air and does not loose its shape
after the valve has been closed.
5. Check the valve on the Sleepform mattress is
working properly.
6. Check the Sleepform mattress for
scratches,scores or punctures. Seal any holes
with the repair patches supplied with
the product.
Holes can be found by visual inspection or by
covering the surface of the pillow with soapy
water and watching for air bubbles.
If a hole has been found clean the area and
let it dry.
Select a patch and put glue on it and on the area
around the hole.
Wait for 2 minutes and firmly press the patch
over the hole ensuring that no air remains under
the patch.
The bond will be complete after 24 hours.
DO NOT FULLY IMMERSE THE SLEEPFORM
MATTRESS.
7. Check the airflow mattress is intact and that
the cushion is even and flat and that has not
gathered in within the cover.