LEGRAND care NOVO Go Mode D'emploi page 37

NOVO Go DOCK
Send Alarm with NOVO Go DOCK
4.3
NOTE
Before you use this function for the first time, make sure that NOVO Go DOCK and NOVO
Go are paired, refer to
Use NOVO Go DOCK to send an alarm as follows:
1 Make sure that NOVO Go DOCK and NOVO Go are in the same location. It is not necessary to put
NOVO Go in NOVO Go DOCK to use this function.
2 On NOVO Go DOCK, press the Alarm button
alarm.
3 NOVO Go sends the alarm. Refer to the configuration of your NOVO Go.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
3 Get started with NOVO Go DOCK
5 Safety and Handling Information
Find My NOVO Go
4.4
If your NOVO Go is missing, find it as follows:
1 Press and hold the Extra button
2 The missing NOVO Go makes a clear sound at regular intervals. The Alarm button and the Extra
button flash green during a period of 60 seconds.
3 If the missing NOVO Go is found, press the Extra button on your NOVO Go. The sound stops and
the Extra button and Alarm button go off.
4 The Extra button on NOVO Go DOCK goes off automatically after 60 seconds.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
User Manual
3.3 Pair NOVO Go DOCK and NOVO
. NOVO Go DOCK tells NOVO Go to send the
C
for 3 seconds. The Extra button flashes yellow.
D
NE41 21003-02 v2.0
Go.
10