LEGRAND care NOVO Go Mode D'emploi page 18

NOVO Go
Mobile Network Connection Status
8.3
If the Network icon flashes, NOVO Go cannot find connection to the mobile network and no alarm can
be sent.
The Network icon goes off when NOVO Go finds connection.
Device Temperature
8.4
If NOVO Go gets too hot, all LED lights start to flash and most functions go off. Correct functionality is
restored when NOVO Go gets a lower temperature.
Set NOVO Go to On
8.5
1 Press and hold the Alarm button
2 The Alarm button comes on with a green light for a period of 2 seconds.
3 The Network icon slowly flashes for a period of 5 seconds, refer to
Status
Set NOVO Go to Off
8.6
1 Press and hold the Alarm button
sound.
2 After 5 seconds the Alarm button comes on with a red light and then slowly goes off.
User Manual
and the Extra button
D E
and the Extra button
D E
NE41 21002-02 v2.0
at the same time for 5 seconds.
8.3 Mobile Network Connection
at the same time. NOVO Go makes a
16