LEGRAND care NOVO Go Mode D'emploi page 34

NOVO Go DOCK
10 Do a test to make sure that NOVO Go DOCK operates correctly, refer to
NOVO Go DOCK.
11 Remove NOVO Go from NOVO Go DOCK and do step 10 again.
12 If NOVO Go does not send alarms, speak with your Legrand Care distributor.
13 If NOVO Go sends alarms, you are good to go!
Set NOVO Go DOCK to ON
3.1
1 Open the lid on the bottom of NOVO Go DOCK.
2 Press and hold the On/Off button
Go DOCK flash and then go off.
3 After approximately 3 seconds the Alarm button comes on and stays red.
NOTE
This applies to standard configuration.
4 Close the lid.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
3 Get started with NOVO Go DOCK
Set NOVO Go DOCK to Off
3.2
1 Open the lid on the bottom of NOVO Go DOCK.
2 Press and hold the On/Off button
3 After 3 seconds NOVO Go DOCK makes a sound and the Alarm button goes off.
4 Close the lid.
RELATED CHAPTER(S)
2 Your NOVO Go DOCK
User Manual
for more than 3 seconds. The buttons on the top of NOVO
G
.
G
NE41 21003-02 v2.0
4.3 Send Alarm with
7