HomeMatic IP HmIP-RGBW Notice D'installation Et D'emploi page 36

Maintenance and cleaning
8 Maintenance and cleaning
The product does not require any maintenance. Leave any mainte-
nance or repair to a specialist.
Clean the device using a soft, clean, dry and lint-free cloth. Do not use any
detergents containing solvents, as they could corrode the plastic housing
and label.
9 General information about radio operation
Radio transmission is performed on a non-exclusive transmission path,
which means that there is a possibility of interference occurring. Inter-
ference can also be caused by switching operations, electrical motors or
defective electrical devices.
The transmission range within buildings can differ significantly from
that available in open space. Besides the transmitting power and the
reception characteristics of the receiver, environmental factors such
as humidity in the vicinity play an important role, as do on-site struc-
tural/screening conditions.
Hereby, eQ-3 AG, Maiburger Str. 29, 26789 Leer/Germany declares that
the radio equipment type Homematic IP HmIP-RGBW is in com-
pliance with Directive 2014/53/EU. The full text of the EU decla-
ration of conformity is available at the following internet address:
www.homematic-ip.com.
10 Technical specifications
Device short description:
Supply voltage:
Current consumption:
Power consumption
Standby:
PWM base frequency:
36
HmIP-RGBW
12-24 V
DC
8.5 A (max. 2.1 A per channel)
60 mW @ 24 V
1 kHz