Technical Information; Switchboard External Line Access Code; To Insert A Pause; Recall - TIPTEL 114 Mode D'emploi

Technical information

Switchboard external line access code

You may need to enter an access code (e.g. 0) in order to get an outside line.
So that the switchboard has time to pick up an outside line, you may also need to
add a pause after the access code.
A Pause lasts 3.6 seconds.

To insert a pause

1. Begin dialling a number and press (P) where a pause is required.

Recall

The button (R) is used when connected to certain switchboards, e.g. to transfer calls,
and for some Calling Features or those services available via your network provider.

Wall mounting your phone

1. Drill two holes in the wall 100mm vertically apart.
2. Insert the screws using wall plugs. Leave approx. 5mm of the screw head pro-
truding from the wall to hold the base securely in place.
3. Insert the screws using wall plugs. Leave approx. 5mm of the screw head pro-
truding from the wall to hold the base securely in place.
Technical information
25
UK