Publicité
Les langues disponibles
Les langues disponibles
Getting prepared for ...
... dry usage
Your skin must be dry and free from grease
or cream.
Optional skin cooling: For the first few epi-
lations or if you have sensitive skin, you can
use the ice glove, recommended by dermato-
logists to help reduce possible skin irritation.
• Ensure that the gel pack has been in the
deep freezer (***) for at least 2 hours (for
convenience you can store the gel packs in
the freezer).
• Insert the gel pack underneath the glove's
transparent foil. Use only with glove.
• Put transparent (cool) side of the glove on
your leg.
• Start cooling for approx. 1/2 minute, longer
if needed.
• Epilate the cooled skin area immediately.
• Repeat cooling and epilating until
completion.
• While epilating, please ensure your skin is
dry.
Important: Apply the ice glove to the same
area for no longer than 2 minutes. Keep away
from sunlight. Do not use gel pack when
damaged. Dispose of in household waste. Do
not use if you are hypersensitive, allergic to
the cold, or if your skin suffers from sensory
disturbances, when suffering from cardiac
diseases or arterial circulatory disorders.
... wet usage
The appliance can be used on wet skin, even
under running water. Make sure that the skin
is really moist in order to achieve optimum
gliding conditions for the appliance.
After each wet usage, clean the appliance
under running water.
• Before use, always make sure that the
epilation head is clean.
8
All manuals and user guides at all-guides.com
• Always make sure that the epilation head
• To change caps, press their lateral ribs and
• To change heads, press the release button
How to epilate
The epilation head (2) features the new
Close-Grip Technology to ensure extra
efficiency especially with short hairs: The
40 tweezers always keep close contact to
the skin to remove hairs as short as grain
of sand. Thanks to its pivoting feature, it
perfectly adapts to the body contours, for
maximum thoroughness.
The High-Frequency Massage System (1a)
soothes your skin effectively for an ultra
gentle epilation.
The EfficiencyPro cap (1b) for fast epilation
ensures maximum skin contact, positioning
the tweezers at the optimum position at all
times.
1 Turning on
2 How to guide the appliance
(2) is provided with a cap.
pull off.
(6).
• Press one of the lock keys and turn the
switch clockwise to select your preferred
speed setting:
«I» = extra gentle
«II» = extra efficient
• The «smartlight» comes on instantly
and shines as long as the appliance is
switched on. It reproduces an almost
daylight condition, thus revealing even
the finest hair and giving you a better
control for improved epilation efficiency.
• Always stretch your skin when epilating.
• Always make sure that the epilation area
between the massaging rollers is in
contact with your skin.
Publicité
