Wolf M Serie Guide D'installation page 4

SPECIFICATIONS
Installation Requirements
The M series oven can be installed in a standard or flush
inset application. If a cooktop is being installed above an
oven, a minimum of 1 / " is required between units. Loca-
(6)
4
tion of the electrical supply within the oven opening may
require additional cabinet depth.
Finish the edges of the opening. They may be visible when
the door is open.
For standard installations, face trim will overlap stiles and
rails. Refer to the chart below.
For flush inset installations, a minimum
required on all sides. To ensure consistent reveals, each
corner of the opening must be exactly 90°.
INSTALLATION REQUIREMENTS
BASE SUPPORT
Single Oven
Double Oven
TRIM OVERLAP
Top
Bottom
Sides
|
4 Wolf Customer Care 800.222.7820
All manuals and user guides at all-guides.com
1 / " reveal is
(3)
8
MIN
250 lb
(115 kg)
400 lb
(181 kg)
1"
(25)
0"
(0)
11 / "
(18)
16
DUAL INSTALLATION
Two M series ovens can be installed side by side in a
standard or flush inset application. A dual installation kit is
required. To maintain appropriate airflow, the ovens must be
installed into one opening. Any cosmetic or structural mate-
rial placed between the ovens will impede airflow and is not
recommended. Refer to illustrations on the following pages.
The dual installation kit is available through an authorized
Wolf dealer. For local dealer information, visit the find a
showroom section of our website, wolfappliance.com.