LEGRAND MP2.10 Mode D'emploi page 50

Protection unit MP2.10
1. Introduction
1.1 Identification of main parts
The MP2.10 protection unit is available in 2 versions:
1. MP2.10 protection unit (0 283 04): always provides the possibility of connection to the EMS system
2. MP2 protection unit + measurement (0 283 05), must necessarily be equipped with the EMS power
supply module (4 149 45) and connection cables to the breaker (See EMS guide).
Configurations de default de l'unité de protection
Reference
Protection
Measure
* EMS / RS485 communication
* Programmable outputs
*through dedicated system accessories in the EMS catalog (see EMS guide).
50
T
TEST button
LED Display
Navigation knob
EMS system status LED
USB port with protective cap
Protection status LED
0 283 04 0 283 05