Automatic Mode; Party Mode - Sabiana Energy Smart ENY SHP-130 Instructions D'installation, D'utilisation Et D'entretien

English
• MANUAL VENTILATION FUNCTION;
Press "M" and scroll with the TOUCH PAD until the
"Manual ventilation" mode starts flashing.
"Enter"
Then press the
DAY
With the "Manual ventilation" mode enabled,
the speed of the fan at the various points can
be adjusted by scrolling with the TOUCH PAD.
Turning the key clockwise on the pad increases fan
speed, while anticlockwise decreases fan speed.
The "Manual ventilation" mode at 100% is
the standard operating mode, correspond-
ing to the project air flow rates set by the
installer during the initial configuration.
_
+
106
key to confirm.
If this icon is
°C
present, the op-
erating mode is
MANUAL
No. Modulation
Speed (default values)
4a
100%
3a
70%
2a
45%
1a
25%

• AUTOMATIC MODE;

Press "M" and scroll with the TOUCH PAD until the
AUTOMATIC mode starts flashing.
"Enter"
Then press the
AUTO
If this icon is
present, the
operating mode
is AUTOMATIC
DAY
When the "Automatic Mode" is enabled, fan
speed is controlled by an automatic control cycle
relative to internal instantaneous variations of the
measured air quality variable (default humidity).
See specific section for more information

• PARTY MODE

Press "M" and scroll with the TOUCH PAD
mode starts flashing.
"Enter"
Then press the
AUTO
P
DAY
If "PARTY" mode is enabled, fan speed is in-
creased in relation to the nominal speed.
If "PARTY" mode is enabled, fan speed is in-
creased in relation to the nominal speed.
"PARTY" mode is a timed function (default 3
hours).
The speed percentage of the "PARTY" mode is set
as a parameter by the installer according to the
customisations requested by the user, starting
from the standard value of 130% compared to
the nominal speed.
key to confirm.
°C
until
"PARTY"
key to confirm.
°C