Haussmann GBV200U Manuel D'utilisation page 17

OPERATING INSTRUCTIONS
Disconnect power source before carrying out
any maintenance. Before every use, check the
blower/vac for any damaged parts, loose or
worn out parts. Replace damaged parts.
Cleaning:
Clean the device after every use in order to
prevent build-up of dirt and residue that could
set and harden on the surfaces of the blower.
a) Clean the casing, vacuum tube and the
flexible adapter tube as well as any ventilation
slots on the unit by using a rag or soft brush.
Never attempt to clean the unit when it is
running or connected to a power supply.
b) Do not use cleaning agents or solvents as
they can cause irreparable damage to the unit.
c) Remove the collection bag after use, turn it
inside out and brush it thoroughly to prevent
mold and unpleasant odours. Wash with soap
and warm water. Allow bag to thoroughly dry
before use.
Removal of Blockages:
Leaves and plant debris can cause clogs. If
blockage occurs, switch the machine off and
disconnect it from the power source. Wait for
the impeller to stop rotating. Remove the suction
tube, collection bag or the flexible adapter tube
as necessary and clear out any debris. Ensure
that the unit is correctly reassembled after
removal of the blockage.
Storage:
Keep the blower/vac in a dry location,
A
inaccessible by children. Do not store the device
in direct sunlight. Clean the device thoroughly
at the end of the season.
17