TechniSat TECHNILINE ISI Manuel D'instructions page 22

Antenna configuration (DVB-S)
In this step of the installation you can adjust your TV setup to the configuration of your
satellite antenna.
> Pressing the OK button accepts the standard antenna setting and allows you to
continue with the "Antenna settings (DVB-T)".
> If the configuration of your reception equipment does not match the standard
setting, you can open the antenna configuration by pressing the Option button
and can adapt the setting on your reception equipment. See the device user
manual for more information.
Antenna settings (DVB-T)
A channel spectrum with the signal levels of the various channels is displayed in this
step, in order to align the DVB-T antenna for the best reception.
> Use the up/down arrow keys to highlight the antenna supply field and open the
selection window by pressing the OK button.
> Switch the antenna supply on or off by highlighting the corresponding entry with
the up/down arrow keys and confirm using the OK button.
> To get to the next step of the installation, use the arrow keys to highlight the
Accept field and confirm with the OK button.
22