LENCO CS-455 BT Manuel D'instructions page 8

CD/MP3/USB/SD Operation
1. Skip up/down buttons
Press the >>| button briefly to play next track.
Press the |<< button briefly to play the current track from the beginning of it if the playing time is more
than 2 seconds.
Press the |<< button briefly to play the previous track if the playing time is less than 2 seconds.
Press the >>| or |<< button and hold to skip forwards or backwards, release to resume normal playback.
2. APS button
Press APS button repeatedly to select TRACK SEARCH, DIRECTORY SEARCH o r
FIRST CHARACTER SEARCH mode.
In TRACK SEARCH mode, the LCD will display TRK T 000 and flash the biggest digit0 that the MMC/SD
card, USB or MP3 disc contain. Rotate the knob to select the number of the flashing digit from 0 ~ 9. Then
press SEL button to confirm the number and flash next smaller digit 0.With the same means, select
the number of the flashing digit. After finishing selecting the number of all flashing digit, press SEL button
to play the track of the selected serial number.
In DIRECTORY SEARCH mode, the LCD will display the root folder(if there is not the root folder, it will find
a root folder named ROOT). Then rotate the knob to select your desired folder, Finally press SEL button to
play the first track of the folder.
In FIRST CHARACTER SEARCH mode, the LCD will display A- rotate the knob to select file's first
character by the order of A~Z and 0~9. Then press >>| or |<< button to select one file its first characters is
the selected one. Finally press SEL button to play the selected file.
3. PLAY/PAUSE, INT, RPT, RDM buttons
1) Press the TOP/ >|| button briefly to interrupt the playback of the disc, SD or USB.
Press again to resume normal playback of the disc, SD or USB.
Press the TOP/>|| button and hold for approximately 0.5 seconds to play the first track of the disc,
SD or USB.
2) Press the INT button to sample the first 10 seconds part of each track, and the INT ON will be visible on
the LCD display.
In the process of INT, press INT button again to stop sampling and to continue playing the current track,
and the LCD will display INT OFF.
3) Press the RPT button once to play the current track repeatedly, and the RPT ONE will be visible on the
LCD display.
During MP3 disc, SD or USB mode, press the RPT button twice continuously to playthe current folder
repeatedly, and the RPT DIR will be visible on the LCD display.In the process of RPT, press RPT
button again to stop playing repeatedly mode and the LCD will display RPT OFF.
4) Press the RDM button to play all tracks on disc in random order, and the RDM ON will be visible on the
LCD display.
In the process of RDM, press RDM button again to stop playing in random order and the LCD will
display RDM OFF.
5) During the normal playback of MP3 disc, SD, USB:
Press the radio preset button 6 and 5 to move up and down10 tracks at a time.
7