Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
RDS 2
The clock setting of this unit is automatically adjusted
according to the CLOCK TIME (CT) data.
If you tune in an RDS station broadcasting incorrect CT data,
the clock might be wrongly adjusted, and that may eventually
affect the timer operation.
When you do not want the clock of this unit to be set according
to the CT data, turn off the auto clock adjustment.
< No matter which RDS mode is selected, the unit receives CT
data and adjusts the clock.
To turn off the auto clock adjustment, press and hold the
RDS MODE button for more than 8 seconds.
< To turn on the auto clock adjustment again, press and hold
the RDS MODE button for more than 8 seconds.
< When the auto clock adjustment is turned off, CLOCK TIME
is not displayed.
14

PTY Search

You can search for stations by programme type.
1
Select FM by pressing the BAND button repeatedly.
2
Press the RDS MODE button for more than 2 seconds.
3
Select the desired programme type (PTY).
Turn the TUNING/SELECT knob to select an item
Select your desired one from among 31 kinds of PTY programmes.
The programme type will blink.
4
Press the ENTER button.
Searching starts.
< When the broadcast whose programme type you have selected
is found, searching stops and the programme type will be
displayed.
< If the broadcast of selected programme type is not found during
PTY Search, it will stop at the beginning frequency.
< If you want to stop searching, press the RDS MODE button.

Publicité

Table des Matières
loading

Table des Matières