KRESS KI200 Mode D'emploi page 13

Indirect measurement: Pythagorean
method three points
As shown in the figure below, measure the
height or width of a building, or when a height
needs to be determined by three distances,
it can be achieved by using Pythagorean
method three points indirect measurement.
Press
appears on the screen. Take the first
measurement by referring to the blinking side
(as shown in the figure above, aiming at the
top point), and the measured value will be
displayed as value 1; keep the instrument
level which performs horizontal measurement
by default; take the second measure by
referring to the blinking side (as shown
in the figure above, aiming at the middle
vertical point), and the measured value will
be displayed as value 2; then make the third
measurement (aiming at the bottom point),
and the measured value will be displayed as
value 3. The calculated distance result will be
displayed on the summary line.
1. The first measurement/hypotenuse
2. The second
measurement/right-angle side
3. The caculated distance of another
right-angle side
1
2
3
4 times, the symbol
13
EN