KRESS KI200 Mode D'emploi page 12

function allows you to measure distances for
inaccessible locations.
Note:
1. All the points to be measured should be on
the same horizontal or vertical plane. In order
to get more accurate measurement results, it
is recommended to use a tripod to rotate the
instrument on the same axis for measurement
(for example, the instrument's corner is fully
unwound against the wall for measurement).
Indirect measurement: Pythagorean
method two points
As shown in the figure below, measure the
height or width of a building, or when a height
needs to be determined by two distances, it
can be achieved by indirect measurement.
12
EN
Press
appears on the screen. Take the first
measurement by referring to the blinking side
(as shown in the figure above, aiming at the
top point), and the measured value will be
displayed as value 2; keep the instrument
level which performs horizontal measurement
by default; take the second measurement
by referring to the blinking side (as shown in
the figure above, aiming at the bottom point),
and the measured value will be displayed as
value 3.
The calculated height is displayed in the
summary line.
1
2
3 times, the symbol