Publicité
Les langues disponibles
Les langues disponibles
GENERAL POWER TOOL
SAFETY WARNINGS
Read all safety warnings and all
WARNING
instructions, illustrations and
specifications provided with this power tool.
Failure to follow all instructions listed below may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference. The term "power tool" in the warnings
refers to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
• Do not operate power tools in explosive atmo-
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
• Do not operate power tool in an area where it
could contact electrical wiring or an electrically
charged object. Contact with a "live" wire or
object will make exposed metal parts of the tool
"live" and shock the operator.
• Do not operate power tool near moving ma-
chinery. The cable can be tangled in moving parts,
pulling in the power tool and your hands and arms.
• Do not use near any heat sources such as ra-
diators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
• Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
ELECTRICAL SAFETY
• Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the risk
of electric shock. Dry hands before turning tool on or
off and before removing or installing the battery pack.
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the influence of drugs, alcohol or medication. A
moment of inattention while operating power tools
may result in serious personal injury.
• Use personal protective equipment. Always
wear eye protection. Protective equipment such
as dust mask, non-skid safety shoes, hard hat, or
hearing protection used for appropriate conditions
will reduce personal injuries.
• Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations.
POWER TOOL USE AND CARE
• This Inspection Scope is not intended for medi-
cal use or personal inspection.
• Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
hands of untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool operation. Do not use if power tool smokes
or gives off fumes. If damaged, have the power
tool repaired before use. Many accidents are
caused by poorly maintained power tools.
• Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool
for operations different from those intended could
result in a hazardous situation. Only use accessories
specifically recommended for this tool. Others may
be hazardous.
• Clean only with dry cloth. Certain cleaning agents
and solvents are harmful to plastics and other
insulated parts. Some of these include: gasoline,
turpentine, lacquer thinner, paint thinner, chlorinated
cleaning solvents, ammonia and household deter-
gents containing ammonia. Clean dust and debris
from vents. Keep the apparatus handle clean, dry
and free of oil or grease.
BATTERY USE AND CARE
• Always remove the battery pack before cleaning.
• This tool is designed to be powered by a 12 volt
MILWAUKEE battery pack. Do not attempt to use
with any other voltage or power supply.
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away
from other metal objects like paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery, avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Contact a MILWAUKEE service facility for ALL
repairs. Have your power tool serviced by a
qualified repair person using only identical re-
placement parts. This will ensure that the safety
of the power tool is maintained.
• Never disassemble the power tool or try to do any
rewiring on the power tool's electrical system.
SPECIFIC SAFETY RULES FOR
INSPECTION CAMERA
• Do not store the tool in an area of high heat or
humidity. Do not expose the tool to extended
high heat from the sun (such as on a vehicle
dashboard.) Damage to the product or the battery
pack can result.
• For indoor use.
• Always use common sense and be cautious when
using tools. It is not possible to anticipate every
situation that could result in a dangerous outcome.
Do not use this tool if you do not understand these
operating instructions or you feel the work is beyond
your capability; contact Milwaukee Tool or a trained
professional for additional information or training.
• Maintain labels and nameplates. These carry
important information. If unreadable or missing,
contact a MILWAUKEE service facility for a free
replacement.
2
SERVICE
Publicité
