Urmet miro 1183/7 Mode D'emploi page 11

ACTIVATING AUDIO BY PRESSING THE (PUSH TO TALK MODE)
BUTTON
If the communication between the calling station and the door phone is disturbed, it is possible to activate
the two audio channels (inwards and outwards) individually.
After having received a call, short press to activate the audio from the door unit, then if the
pressed down, the audio channel is activated externally and the user can speak to the caller. To listen, it is
necessary to press the
To end the conversation, shortly press
Connection of a E2BP module to the
After suitably programming the Yokis devices, it will be possible:
– to activate the centralised closing of the rollers with a button (for example:
– a second button (for example:
For more information on YOKIS products, please visit www.yokis.com
DS1183-013A
All manuals and user guides at all-guides.com
button.
button.
door phone for the centralisation of lights and rollers
Y1
X1
GT
) will activate the turning off of the lights.
Roller
R1
R1
R1
button is held
SD541-4002
Roller
R1
R1
ANTENNA
R1
);
11