ENER-J S-71918 Guide D'installation page 4

• Add other ENER-J smart products on the same app.
All manuals and user guides at all-guides.com
• Supports up to 128GB MicroSD card that never lets you miss any
thing (TF card not included).
4) Light Operation
The spotlight has 2 different control dials which allows you to adjust
the settings, these control dials are located underneath the light body.
1) Turn the control knob TIME to adjust the duration of the
illumination. The lighting duration can be adjusted from approx.
3 seconds to 7 minutes (+/-10%).
2) Turn the control knob LUX to adjust the daylight level: At the
position , the motion detector only reacts at night. In the
position
5) Set up
Connect the Smart Floodlight Camera to the mains:
Kindly power the floodlight camera. After 10 seconds, the speaker
starts; after 15 seconds, the infrared sensor starts detecting; after 20
seconds, the infrared PCBA red LED lights up and blinks rapidly; after
30 seconds, the PTZ starts detection, first left and right, then Up and
down; after 40 seconds, you will hear the message Device Ready to
Pair.
6) Install App
Please follow below instruction to setup and use your Smart LED
Floodlight Camera device.
1. Downloading and installing the APP
Open App Store (for iOS) or Google Play (for Android) on your
device, search "ENERJSMART" or scan the QR code as folllowing to
download the right App for your device.
, the motion detector only reacts at daylight.
3