ENER-J S-71918 Guide D'installation page 13

3. Link you ENERJSMART Account
All manuals and user guides at all-guides.com
Now follow the in-app instructions to link you ENERJSMART App
account. Once complete you'll be able to say "Okey Google, turn
my lamp on" or "Okay Google, set hallway to ON/OFF".
Thank you for choosing ENER-J!
Customer satisfaction is our TOP priority, please let us know how you felt about your
experience. Happy? We are so happy that you are pleased with our product. Feel
free to express your newfound joy! Share your experience by writing a review.
Not Happy? If you are not fully satisfied with the item you received, have any
problems like damages, or questions, please contact us. We typically respond within
24-48 hours.
Caution
Products should be installed as per the instructions mentioned in this manual and
also as per current electrical codes National Electric Code (NEC).To avoid the
risk of fire, electrical shock or injury, it is advisable that the installation is done by
a trained Electrician. Also it is important that mains power supply is switched off
before the product is installed or repaired.It is advisable to keep the manual for
future reference.
Please Note
Wi-Fi frequency is 2.4GHz and not 5GHz (5GHz not supported). You can do this
by contacting your broadband service provider and requesting to either switch to
2.4GHz entirely or split it between 2.4GHz and 5GHz.
If despite following the process as instructed above, you still fail to add the device,
then possibly there is a firewall on your Wi-Fi router blocking this device to be
connected to your Wi-Fi Router. In such a case you would need to disable the
firewall, add this device following above process and once the device is added,
enable the firewalls back again.
Stuck? Confused?
Contact our Technical Support team on:
T: +44 (0)2921 252 473
E: support@ener-j.co.uk
Lines are open Mon - Fri (8am to 4pm)
12