DeWalt DW253 Mode D'emploi page 21

10 Secure workpiece
Use clamps or a vice to hold the workpiece. It is
safer and it frees both hands to operate the tool.
11 Do not overreach
Keep proper footing and balance at all times.
12 Avoid unintentional starting
Do not carry the plugged-in tool with a finger on
the switch. Be sure that the switch is released
when plugging in.
13 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
14 Disconnect tool
Shut off power and wait for the tool to come to a
complete standstill before leaving it unattended.
Unplug the tool when not in use, before servicing
or changing accessories.
15 Remove adjusting keys and wrenches
Always check that adjusting keys and wrenches
are removed from the tool before operating the
tool.
16 Use appropriate tool
The intended use is described in this instruction
manual. Do not force small tools or attachments
to do the job of a heavy-duty tool. The tool will
do the job better and safer at the rate for which it
was intended.
Warning! The use of any accessory or attachment
or performance of any operation with this tool, other
than those recommended in this instruction manual
may present a risk of personal injury.
17 Do not abuse cord
Never carry the tool by its cord or pull it to
disconnect from the socket. Keep the cord away
from heat, oil and sharp edges.
18 Maintain tools with care
Keep the tools in good condition and clean for
better and safer performance. Follow the
instructions for maintenance and changing
accessories. Inspect the tool cords at regular
intervals and, if damaged, have them repaired by
an authorized D WALT repair agent. Inspect the
E
extension cords periodically and replace them if
damaged. Keep all controls dry, clean and free
from oil and grease.
19 Check for damaged parts
Before using the tool, carefully check it for
damage to ensure that it will operate properly
and perform its intended function.
16
All manuals and user guides at all-guides.com
20 Have your tool repaired by an authorized
Package contents
The package contains:
1 Heavy duty pistol grip screwdriver DW263K or
1 Heavy duty universal screwdriver
1 Heavy duty drywall screwdriver DW274K/
1 Kitbox (K-models only)
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories
• Take the time to thoroughly read and understand
Description (fig. A)
Your DW263K screwdriver has been designed for
professional screwdriving applications and for use as
a nutsetter.
Your DW253/DW268K/DW269K universal
screwdriver has been designed for professional
applications.
Your DW274K/DW274KN drywall screwdriver has
been designed for driving drywall fasteners through
drywall board into timber or metal framing studs.
1 Variable speed switch
2 Lock-on button
3 Forward/reverse slider
4 Depth adjustment collar
5 Depth locator (DW263K/DW274K/DW274KN)
5 Ball retainer (DW268K/DW269K)
6 Belt clip
Check for misalignment and seizure of moving
parts, breakage of parts and any other conditions
that may affect its operation. Have damaged
guards or other defective parts repaired or
replaced as instructed.
Do not use the tool if the switch is defective.
Have the switch replaced by an authorized
D WALT repair agent.
E
D WALT repair agent
E
This Power Tool is in accordance with the
relevant safety regulations. To avoid danger,
electric appliances must only be repaired by
qualified technicians.
DW253/DW268K/DW269K or
DW274KN
which may have occurred during transport.
this manual prior to operation.
E N G L I S H
en - 3