Honeywell HEV680 Serie Manuel D'instructions page 4

PREPARING THE WICKING FILTER
Step 1
1. Remove Water Tanks and lay aside. Grip housing and lift up to expose Wicking Filter.
2. Carry Wicking Filter and Base to sink or tub.
3. Remove Filter from Base and run under cool water until saturated.
4. Carefully place wet Filter back in base; do not squeeze out excess water.
FILLING/REFILLING WATER TANKS
The Tanks can be filled in two ways.
To fill without removing Water Tanks:
Step 1
1. Flip Tank Cover open.
2. Pour cool tap water into Water Tank through the Tank Cover opening.
Do not use warm or hot water.
3. Close Tank Cover to keep objects and debris out of water.
Repeat for second Water Tank.
To fill at the sink or tub by removing Water Tanks:
Step 1
1. Flip Tank Cover open. Grasp Tank Handle and lift Water Tank to remove from Base. Carry
Tank to sink or tub. NOTE: Do not use the Tank Cover to carry Water Tank.
2. Fill Tank through the Tank Cover opening. When filling, allow enough space at the top to
minimize splashing when carrying. Use cool tap water; Do not use warm or hot water.
NOTE: Do not attempt to unscrew Plunger Housing from underside of Tank.
This is not meant to be removed.
4
All manuals and user guides at all-guides.com
Step 2
Step 2
Step 2
Step 3
Step 3
$
Step 3
Step 4
$
Step 4
$