Philips QC5040 Mode D'emploi page 14

English
14
5 Insert a screwdriver into the small slot in the
printed circuit board marked with an arrow.
Push the screwdriver down until part of the
printed circuit board breaks off.
6 Pull the battery out of the appliance.
Do not connect the appliance to the mains again
after you have removed the battery.
guarantee and service
If you need service or information or if you have a
problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer
Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there
is no Consumer Care Centre in your country, go to
your local Philips dealer.
All manuals and user guides at all-guides.com