BEMIS BIOBIDET BB-500 Mode D'emploi page 6

BEFORE INSTALLATION
Do not plug the power cord in until installation is complete.
Please contact our service center at 847.458.2334 for alternate
fittings or assistance with this process.
1. Turn Off Water
Turn off the water shut-off
valve. Drain the toilet tank
completely by flushing the
toilet. Unscrew the hose
connected to the toilet tank.
You may want to have a towel
ready to catch any residual water.
2. Remove Toilet Seat
Remove the mounting bolts to
release the existing toilet
seat from the toilet.
10
3. Install Catch Plate
Insert the rubber anchors into the toilet mounting holes. Align the installation
guide to the toilet rim. Place the catch plate and bolt guides over the mounting
holes. Insert the bolts through the guides, catch plate, and rubber anchors.
Fasten to secure the catch plate on the toilet with a Phillips screwdriver.
Existing
Toilet Hose
4. Install Your BB-500
Slide the bidet seat all the way onto
the catch plate until you hear a click.
Press and hold the reset
button for 2 seconds
before continuing installation.
Bolts
Bolt Guides
Catch Plate
Rubber Anchors
Catch Plate Guide
11