Worx CONTOUR WX461 Traduction Des Instructions Initiales page 8

This tool may cause hand-arm vibration syndrome if its use is not adequately
managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of
use should also take account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually doing the job. This may
significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
Hex key
Dust tube
Parallel guide
Wood cutting blade: 100mm x 10TPI, HCS
Metal cutting blade: 92mm x 21TPI, BIM
Aluminum cutting blade: 100mm x 8TPI, HSS
8
We recommend that you purchase your accessories from the same store that sold you the tool.
Use good quality accessories marked with a well-known brand name. Choose the type according
to the work you intend to undertake. Refer to the accessory packaging for further details. Store
personnel can assist you and offer advice.
Jigsaw
All manuals and user guides at all-guides.com
C or less.
o
1
1
1
1
1
1
EN