Worx CONTOUR WX461 Traduction Des Instructions Initiales page 7

TECHNICAL DATA
Type WX461(460-479-designation of machinery, representative of Jigsaw)
Voltage
Power input
No load speed
Stroke length
Cutting capacity,
max. thickness
Bevel capacity
Protection class
Machine weight
NOISE AND VIBRATION DATA
A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Cutting wood
Cutting steel metal
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
Jigsaw
All manuals and user guides at all-guides.com
Wood
Aluminum
Steel
Vibration emission value a
Uncertainty K= 1.5m/s²
Vibration emission value a
Uncertainty K= 1.5m/s²
230-240V~50Hz
550W
800-2800/min
24mm
80mm
12mm
6mm
0±45°
/ II
2.4kg
L : 91dB(A)
pA
L : 102dB(A)
wA
3dB(A)
80dB(A)
= 7.07m/s
2
h
= 6.39m/s
2
h
EN
7