JBL Foggy Mode D'emploi page 10

All manuals and user guides at all-guides.com
Instructions for use
Important safety instructions
· Check that the voltage stated on the transformer corresponds to the mains voltage.
· The power must always be disconnected by pulling the plug out of the power socket
before handling the transformer.
· The power cable of the transformer must not be repaired or replaced. In the event
that the cable is damaged, the transformer must be disposed of.
· The transformer should only be used for the purpose specified in these instructions.
· Do not place the transformer close to any heat source.
· Do not submerge the transformer in water.
· Do not open the transformer.
· The transformer must be kept out of reach of children.
· For indoor use only.
· Disconnect from the mains supply before handling the ultrasound generator.
· Do not touch the ultrasound generator when in operation.
Parts and description:
1. Transformer
2. Ultrasound generator
3. Supply lead (24 V)
4. Water level sensor
5. Control lamp
6. Membrane
7. Special spanner to change membrane
JBL Foggy provides optimum humidity in any rainforest terrarium. Using ultrasound
technology, water is atomised, producing real mist. In combination with a control unit
(e.g. time switch etc.), the humidity in the aquarium can be precisely adjusted. This
allows amphibia and other humidity-loving animals to be kept under the best possible
conditions. The JBL Foggy Set includes a protective cave which guards the terrarium
animals from direct contact with the ultrasound generator.
Note:
We advise against the use of this appliance in an aquarium, as insufficient research has
been carried out into any possible negative effects of ultrasound on fish.