BH FITNESS G6156 Mode D'emploi page 11

ELEVATION.-
The inclination
independently of all other functions.
Each time that you set switch (L) to
position I, as described in the Starting
section, Fig.1. the inclination level that
was last used will be displayed.
To lower the inclination to zero with
the unit stopped, press and hold the
START key for 5 seconds.
If inclination is not at zero when the
START key is
exercising, the machine will zero itself
while it is starting.
You can adjust the elevation level by
pressing the INCLINE▲ or INCLINE▼
keys to specify a value of 0 to 12,
depending on how you would like to
do the exercise.
Important: Do
inclination level of your treadmill by
propping it up on objects.
IMPORTANT: THE
LEVEL MUST BE AT ITS LOWEST
SETTING BEFORE
TO PUT THE TREADMILL INTO THE
FOLDED POSITION.
All manuals and user guides at all-guides.com
function operates
used to begin
not change the
INCLINATION
ATTEMPTING
PULSE MEASUREMENT.-
Your pulse rate is measured by
placing both hands on pulse sensors
(R) with which the electronic unitis
equipped. The pulse rate readout will
appear after a few seconds. The heart
symbol beside the pulse rate value will
flash in time with your heart rate,
Fig.4.
IMPORTANT: This is not a medical
appliance and therefore the heart rate
shown is merely
purposes.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.
11
for guideline