Riding Operations Instructions; Before Riding; Riding; Braking - Joyor F Série Mode D'emploi

Joyor User Manual
3 OPERATIONAL INSTRUCTIONS

3.3 Riding Operations Instructions

3.3.1 Before Riding

Choose a suitable venue for riding.
•
Unfold the electric scooter according to the instructions.
•
Adjust the height of the handlebar tube according to your height.
•

3.3.2 Riding

Press the power button to turn on the power. The speed is set by default to gear level 1.
•
For safety purposes, Joyor electric scooter has a safe start design which means the motor can start only when the speed of
•
the vehicle is above 0. It prevents motor start when the acceleration handle is pressed by mistake. To start the riding
operations, put one foot on the standing board and the other foot on the ground and kick scoot it like a classic kick scooter.
When the scooter is in motion and its speed is above 0, smoothly use the acceleration handle to start the motor. Once the
motor starts, put the other foot on the standing board and continue riding.
When riding, adjust the gear level from 1 to 3, use lights and horn according to the road conditions and according to the
•
situation.
Be aware of the cruise control function. Cruise control function is activated when the acceleration handle is pressed with the
•
same pressure for 3 seconds.
Be aware of the possibility of unpredictable sudden obstacles on your way and control the speed level.
•

3.3.3 Braking

Use the rear brakes handle for braking under normal circumstances. Use front brake handle (for models series Y and M) for
•
braking in emergency situations.
The greater pressure you put, the greater braking force will be applied. Be aware that hard braking may result in an
•
accident due to slipping of the wheels, lost of balance and fall of the vehicle. Hard braking might also cause damage to the
tire.