Publicité
Les langues disponibles
Les langues disponibles
Note: Apply blue thread locker to all bolts.
1.
Remove fascia:
a)
Using Philip screwdriver, remove (2) screws from wheel well liner both sides of vehicle, see Figure 2.
b)
Open trunk to access taillight. Remove taillight trim panel. Using 10mm socket, remove (1) bolt from fascia both sides.
c)
Using flat head screwdriver, remove (5) plastic rivets from fascia and underbody panel panel.
1.
Remove fascia (Cont'd):
d)
Using 10 mm socket, remove (2) screws from underbody panel.
e)
Gently remove fascia and set aside in safe place.
© 2023 Horizon Global™ Corp. - Printed in Mexico
Sheet 4 of 18
25007NP
Both
sides
03-06-23
Rev. A
Publicité
