Télécharger Imprimer la page

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Website: www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1589 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2021 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBER: 76915
Max Tongue
Weight
Weight
350 lb. (159 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in Stelvioance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFOR M
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, AN Y WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAM AGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of M ichigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, M ichigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
6.
Patent info: For patent info visit www.ceqpat.com
Rev 8/2015
Sheet 1 of 12
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
76915N
8-20-21
Rev. A

Publicité

loading

Sommaire des Matières pour Horizon Global 76915

  • Page 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear excepted.
  • Page 2: Installation Instructions

    RISE 0.75’’ of the ball platform Distance from the center of the ball RISE hole to the center of the pin hole Hitch Illustration ©2021 Horizon Global ™ Corp - Printed in Mexico Sheet 2 of 12 76915N 8-20-21 Rev. A...
  • Page 3 ✓ Proper torque is needed to keep the hitch secure to the vehicle Locked Towing when towing. Installation & Removal Position Position ⑦ ©2021 Horizon Global ™ Corp - Printed in Mexico Sheet 3 of 12 76915N 8-20-21 Rev. A...
  • Page 4 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access o r attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2021 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 12...
  • Page 5: Garantie À Vie Limitée

    Les cours de l’État situées dans le comté d’Oakland, M ichigan, constituent les autorités PAS appliquer les freins NI accélérer. judiciaires exclusives relativement à tout litige relevant de cette Garantie. Rev 9/2014 Pat. Info www.ceqpat.com ©2021 Horizon Global ™ Corp. - Imprimé au Mexique Feuille 5 de 12 76915N 8-20-21 Rev. A...
  • Page 6: Applications

    Distance depuis le centre du trou de HAUTEUR boule jusqu'au centre du trou de Illustration de l’attelage cheville ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 6 de 12 76915N 8-20-21 Rev. A...
  • Page 7 Un couple de serrage approprié est nécessaire pour maintenir Position de l’attelage fixé au véhicule lors du Position d’installation remorquage verrouillée remorquage. et de retrait ⑦ ©2021 Horizon Global™ Corp. - Imprimé au Mexique Feuille 7 de 12 76915N 8-20-21 Rev. A...
  • Page 8 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’ attelage. ©2021 Horizon Global ™ Corp. - Imprimé au Mexique...
  • Page 9: Garantía Limitada De Por Vida

    NO aplique los frenos y NO Rev 9/2014 aumente la velocidad. Pat. Info www.ceqpat.com ©2021 Horizon Global ™ Corp - Impreso en México Hoja 9 de 12 76915N 8-20-21 Rev. A...
  • Page 10 Distancia desde el la plataforma de la esfera centro del orificio de ELEVACIÓN la esfera hasta el centro del orificio del Ilustración del enganche pasador ©2021 Horizon Global ™ Corp - Impreso en México Hoja 10 de 12 76915N 8-20-21 Rev. A...
  • Page 11 Se necesita el torque adecuado para mantener el enganche unido Posición de remolque firmemente al vehículo durante el Posición de instalación bloqueada remolque. y extracción ⑦ ©2021 Horizon Global ™ Corp - Impreso en México Hoja 11 de 12 76915N 8-20-21 Rev. A...
  • Page 12 Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2021 Horizon Global™ Corp - Impreso en México Hoja 12 de 12...