Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
3500 lb. (1589 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2019 Horizon Global ™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 76905
Max Tongue
Weight
Weight
350 lb. (159 kg)
N/A
N/A
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFOR M
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, AN Y WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAM AGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of M ichigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, M ichigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 15
76905NP
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
06-18-19
Rev. B

Publicité

Table des Matières
loading

Sommaire des Matières pour Horizon Global 76905

  • Page 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Page 2: Installation Instructions

    RISE 0.75’’ of the ball platform Distance from the center of the ball RISE hole to the center of the pin hole Hitch Illustration ©2019 Horizon Global ™ Corp - Printed in Mexico Sheet 2 of 15 76905NP 06-18-19 Rev. B...
  • Page 3 Note: For receiver installation & use, see instruction 76900N with receiver kit. CLICK Representative Brackets Rear  ✓ ①② Proper torque is needed to keep the ③ hitch secure to the vehicle when towing. ©2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 3 of 15 76903N 06-18-19 Rev. B...
  • Page 4 Observe safety precautions when working beneath a vehicle and wear eye protection. D o not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 4 of 15...
  • Page 5 ⑤ (teeth side against hitch) i nto weldnuts. Tighten all fasteners with torque wrench to 76 Lb.-Ft. (103 N*M) Proper torque is needed to keep the hitch secure to the vehicle when towing. ©2019 Horizon Global Americas Inc. - Printed in Mexico Sheet 5 of 15 76905NP 06-18-19 Rev.
  • Page 6: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Page 7: Applications

    Distance entre le boule. centre du trou de ÉLÉV. boule et le centre du trou de cheville Illustration de l'attelage ©2019 Horizon Global ™ Corp. - Imprimé au Mexique Feuille 7 de 15 76905NP 06-18-19 Rev. B...
  • Page 8 Illustration Support Arrière  ✓ ①② Un couple de serrage approprié est nécessaire pour maintenir l’attelage ③ fixé au véhicule lors du remorquage. ©2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 8 de 15 76905NP 06-18-19 Rev. B...
  • Page 9: Installation De L'attelage

    Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’ attelage. ©2019 Horizon Global Americas Inc. - Imprimé au Mexique...
  • Page 10 Avec une clé dynamométrique, serrer tous les dispositifs de fixation à 76 lb-pi (103 N*M) Proper torque is needed to keep the hitch secure to the vehicle when towing. ©2019 Horizon Global Americas Inc. - Imprimé au Mexique Feuille 10 de 15...
  • Page 11: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del des gaste...
  • Page 12 Distancia desde el centro del orificio de la esfera hasta el ELEVACIÓN centro del orificio Ilustración del enganche del pasador ©2019 Horizon Global™ Corp. Impreso en México Hoja 12 de 15 76905NP 06-18-19 Rev. B...
  • Page 13 Soporte de ilustración Atrás  ✓ ①② Un couple de serrage adéquat est essentiel pour bien fixer l'attelage au véhicule lors ③ du remorquage ©2019 Horizon Global Americas Inc. - Impreso en México Hoja 13 de 15 76905NP 06-18-19 Rev. B...
  • Page 14 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispos i tivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. ©2019 Horizon Global Americas Inc. - Impreso en México...
  • Page 15 Apretar todos los fijadores con una llave de torsión a 76 Lb.-pies (103 N*M) Proper torque is needed to keep the hitch secure to the vehicle when towing. ©2019 Horizon Global Americas Inc. - Impreso en México Hoja 15 de 15...

Table des Matières