Samsung DV455 Serie Mode D'emploi page 46

Operating instructions, tips
7. Once the Start/Pause button is pressed the "PS" will start to blink.
Once it starts blinking the phone will automatically start to connect.
8. After the "PS" is displayed, press the Temp & Start/Pause buttons
simultaneously for 3 seconds. Please wait until the Smart Control
Enabled icon [
starts blinking, press and hold the Signal on/off button for 3 seconds
to activate the Smart Control. If the Smart Control is enabled, the
Smart Control enabled icon [
9. Press the dryer name tab to connect to the dryer.
DV455_02836F-08_EN.indd Sec3:46 DV455_02836F-08_EN.indd Sec3:46
All manuals and user guides at all-guides.com
] starts blinking. If the Smart Control enabled icon
] is turned on.
English - 46
Figure 8
Figure 9
Figure 10
2013-12-12 2013-12-12 5:12:05 5:12:05