FRACCARO MILANO 4 Guide Rapide page 37

Quick Reference DVR MILANO
Connect the BUS RS-485 of the camera to the back panel of the DVR.
Press "MENU", than "SETUP" and "RS-232/422/485
Setup" on the DVR for enter to the BUS configuration
and enter the same Protocol (Model) and Baud Rate of
the PTZ camera.
Press "MENU", than "SETUP" and
Setup" on the DVR and enter the ID Address of the
single PTZ camera.
ATTENTION: Please be sure that all cameras have
di fferent ID Address.
Now the camera it is correctly connected to the DVR and is possible to manage it using the remote controller, mouse or the
PC software.
All manuals and user guides at all-guides.com
RS-232/ 422 /485 Setup
COM Port
Device Type
Model
Baud Rate
Data Bit
Stop Bit
Parity
DVR/Camera ID
Pre-Camera Setup
"Pre-Camera
REC Resoluti on
Watermark
Camera
1
2
...
37/138
RS-232 RS-422/485
PTZ
Pelco (D-Type)
4800
8
1
None
0
720x288
√
Group
Installed PTZ ID 1 2 3 4 5 6 7 8
√
N/A
√
1
... ...