FRACCARO MILANO 4 Guide Rapide page 33

Quick Reference DVR MILANO
Please return to the DVR , p ress MENU than
SETUP and NETWORK SETUP to access to
the "Network Setup" menu. In this screen enter
an IP address (Ex. 192.168.1.15) that isn't used
by other network devices and the same
Gateway (Ex.192.168.1.1) and Net mask (Ex.
255.255.255.0) o f the PC.
ATTENTION: The IP Address that will be
assigned to the DVR must be different from
the PC one only i n the last number.
Please enter the IP address of the DVR (Ex.
192.168.1.15) in the search bar of Internet
Exp lorer and press Enter.
The Browser will ask to install the ActiveX
control, please confirm all the request. The
connection could be interrupt by the firewall or
the antivirus so please be sure that they aren't
active.
If the browser won't show the image please
insert the IP address of the DVR in the "Trusted
sites" menu.
Please insert the User ID and password of the
user that will access to the DVR.
ATTENTION: The default user is the
administrator and he has user ID: aa and
password:11
Now, using Internet Exp lorer is it possible to
view the image and manage until 4 different
DVRs.
Using Firefo x or other Web browser it is
possible to view the image, the state of the
input alarm and manage the output alarm of the
DVR.
All manuals and user guides at all-guides.com
Net type
Static IP
PPPoE
33/138
Static IP E-mail FTP
IP Address 192.168.1.15
Net Mask 255.255.255.0
Gateway 192.168.1.1
DNS
Username
Password
DDNS Type Dynamic
URL
DDNS Username
DDNS Password
Adv.