FRACCARO MILANO 4 Guide Rapide page 27

Quick Reference DVR MILANO
10 Turn On the DVR using the apposite buttom on the rear panel o f
the DVR. The DVR will show the message:
"Unformatted HDDs found. Do you want to fo rmat now?
[ENTER]: Yes, [ESC]: Cancel". Press the [ENTER] button to
format the hard disk.
4.3 First access to the DVR:
•
Login
After turning on the DVR, p ress the "MENU" button and then move the cursor on the icon called " Login / Logout" and press
"ENTER".
Now enter the name and password. Parameters fro m the factory 's installer has a user name: " aa" and password "11". Move the
cursor on "Login" and confirm by pressing "ENTER".
There are three password levels in the system, including: Administrator (h ighest), Supervisor, and Operator (lowest). The
Operator can operate live video display, the Supervisor live video display, image playback and arch ive, and the Administrator
everything.
CAUTION: The factory setti ng of the DVR takes onl y one user configured as an administrator. In order to increase the
level of security you shoul d use that user for only the first access and change the password as soon as possible.
WARNING: In case of loss of the system password please contact your local distributor who will contact Fracarro
Radi oindustrie S.p.A.
•
Setting Language
Faithfully fo llo w the steps below to configure the language of the DVR:
1. Press the "MENU" button to access the configuration menu;
2. Move the cursor to "SETUP" and confirm by pressing "ENTER";
3. Move the cursor to the "SYSTEM" and confirm by pressing "ENTER";
4. Using the arrow keys move the cursor to the "LANGUAGE" and press the keys "+/-" to set the desired language;
5. Press the "MENU" button to return to the previous menu, the DVR will be pro mpted to save the settings by pressing
the "ENTER";
6. Press "ENTER" to confirm the change of language. The system will restart with the new settings.
All manuals and user guides at all-guides.com
27/138