FRACCARO MILANO 4 Guide Rapide page 32

Quick Reference DVR MILANO
HDD (GB) DVR MILANO CH4 (hours)
160
320
750
1000
ATTENTION: The DVR di vi de the HDD in two different partitions, the largest one (70% of the maxi mum capacity of
the HDD) is used for the normal recording and the other one (30% ) for pre-alarm and pre-moti on recording.
Please wait the comp lete start of the DVR befo re entering the menu, then press "MENU" in split-window d isplay to call up
Menu display, than press login/logout to access to the function of the DVR.
Please before shutting down the system press "MEN U" in split-window d isplay to call up Menu display and press
"Shutdown" then, when the DVR shows "Shutdown completed. You may turn off the system now", it will be possible to
power off the DVR with the apposite switch on the rear panel.
7.2 PC Network connection:
The DVR can be connect to a Ethernet or Internet network. In both case it is possible to manage more DVRs fro m the same PC
and the same CMS (Central Monitorating System ) or view the image and manage the output relay directly fro m a mobile
phone or a Web browser also different fro m Internet Exp lorer.
The first type of connection is made by a cross Ethernet cable that connect the DVR (Fig.A) and the PC or by switch, hub or a
router (Fig.B):
Fig.A
In both case please refer to the following steps to configure the connection:
Instructions
First of all go to a pc, connected to the same
network of the DVR, access to start/run then
enter "cmd" and press Enter. The DOS p ro mpt
will appear.
On the screen enter "ipconfig /all" and press
Enter. The screen will shows all the PC
Network in formation so it is possible to know
which are the Gateway (Ex. 192.168.1.1) and
the PC IP Address (Ex. 192.168.1.14).
All manuals and user guides at all-guides.com
DVR MILANO CH9 (hours)
50
99
230
308
32/138
DVR MILANO CH16 (hours)
25
50
115
154
Fig.B
Picture
25
50
115
154