Royalty Line PKM-1900.7BG Mode D'emploi page 28

Blender
1.
2.
3.
4.
1. Place the motor section on a flat surface, e.g. a
kitchen counter, and make sure it is standing firmly.
2. Ensure that the protective cover (11) is fitted to
the accessory socket (12).
3. Remove the blender protective cover(14) from the
swivel arm(see illustration).
1. Place the foodstuff you wish to process into the
jar(31).
2. Put the blender lid(30) into the jar and ensure it
cover well.
3. Place the midddle cap(29) into the hole in the
blender lid.
1. Place the jar assembly in the motor house,so that
the arrow is aligned with the circle.Turn it clockwise,
so the arrow is aligned with the arrow.
2. Plug the power cord into main power outlet and
switches it ON. Turn Speed control knob to speed
1 (or any speed setting) indicator light on the
control panel will now be illuminated.
3. Select the speed you want using the six speed
buttons. Recommended speeds are shown in the
table above.
1. Switch off the appliance and unplug it before you
change the accessories, or before you take the
appliance apart or when not in use.
2. To detach the jar assembly, turn the jar so the
arrow is aligned with the circle and then remove.
3. Remove blender lid then you may put processed
food out.