Autosen AT008 Notice D'utilisation page 7

3 Function
The unit switches the two complementary outputs OUT1 / OUT2:
With rising temperature OUT1 closes / OUT2 opens when the value SET is
reached.
With falling temperature OUT1 opens / OUT2 closes when the value RESET is
reached.
T
SET
RESET
4 Installation
Before mounting and removing the unit:
► Ensure that no medium can leak at the process connection.
Horizontal mounting recommended for high medium temperatures.
► Insert the unit in a process connection and tighten firmly. Recommended
Tightening torque:
- Process connection G ¼: 35 Nm
HY
T = Temperature
OUT1 (Hno)
Hno = normally open
Hnc = normally closed
OUT2 (Hnc)
HY = Hysteresis
UK
7