KERN KFS-TM Notice D'utilisation Et D'installation page 97

7 Operation
7.1 Start-up
 Press
, the appliance will carry out a self-test. As soon as the weight display
appears, the instrument will be ready to weigh.
7.2 Switching Off
 Press
, the display will disappear.
7.3 Zeroing
Resetting to zero corrects the influence of light soiling on the weighing plate.
Resetting range ± 2 % max.
 To unload the weighing system
 Press
, the zero display as well as the indicator [] next to a will appear.
7.4 Simple weighing
 Place goods to be weighed on balance.
 Wait for stability display [].
 Read weighing result.
Overload warning
Overloading exceeding the stated maximum load (max) of the device, minus a
possibly existing tare load, must be strictly avoided. This could damage the
instrument.
Exceeding maximum loads is indicated by the display of "O-err", and an audio
sound. Unload weighing system or reduce preload.
KFS-TM-BA_IA-def-2321 21