Daspi EPO Manuel D'instructions page 6

g
eneral safety rules
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a high
quality and strict reliability, that's why it will assure you long-
lasting performance. This booklet will offer you all the pieces
of information you may need to install your barrier and to safe
guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution
is unquestionably indispensable and nothing is better than
preventing accidents.
i
Mportant
Any installation or repair, or adjustment of the working
machinery by unqualified people is strictly prohibited unless all
the necessary precautions: power supply disconnected (included
possible batteries). All moving mechanism must be provided
with suitable protections.
DASPI is not responsible for any possible damages or injuries
to people, object or animals, caused by any use not provided
for this booklet and/or any unauthorized modification of the
product. Keep scrupulously this booklet enclosing it with
technical brochure of installation in a suitable place well-know
by all the interested people. You have to operate the elimination
of the packing material (cardboard, plastic, polystyrene, etc.) in
conformity with the regulations in force, remembering that for a
child a plastic envelope could be extremely dangerous. You have
to teach the people employed in using the automation about the
s M
ecurity ecHanisM
distance in MouVeMent
ProduCt
The gear motor EPO has been planned and built in
order to opening swing gates with leaves length
max 3 mt. and with a maximum weight of 200 kg.
DASPI is not responsible for any anomalous and
different use of the gear motor EPO.
IMPOrTANT: The gear motor EPO is not provided
with mechanical clutch and must be installed with
its DASPI control panel or with a control panel
provided with electronic clutch.
use oF tHe autoMatIon
As the automation can be controlled from the
distance through a remote control, you must always
check the full efficiency of all the safety devices. We
recommend inspecting periodically (every 6 Month)
by qualified people the adjustment of the electronic
clutch. If you need to calibrate the protection consult
the paragraph "Adjustment of the electronical clutch"
in the instruction booklet of the electronic central
unit.
englIsH
control and security systems of the installation.Don't install this
product in explosive places.
u
For any kind of upkeep, you have always to cut off the power
supply.
For a correct upkeep of the installation where you have installed
the gear motor EPO follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph "Installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
d
You have to operate the elimination of the materials in conformity
with the regulations in force. All material must be divided by type
(copper, aluminium, plastic, electrical central unit). However
there are not material considered dangerous for the handler.
d
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical
installation.
Dismantle the control console and all the other components of
the installation.
If you have noticed that some components have been damaged,
you have to replace them.
d e
o not install tHe lectric sHocK
autoMation in place full
of explosiVe Moistures
PrelIMInary CHeCks
• Read carefully the instruction.
• Check that the product has not been damage
• Check that the gate structure is strong and that
• Check that the electrical installation is in
• Check that there is a suitable ground safety system
• Check that the manual manoeuvre always is easily
• Remember that the automation makes easy the
lubrIFICatIon
The gear motor EPO is provided with permanent
lubrification
pkeep
eMolition
isMantling
u u
se
tHe gloVes for Welding
during the transport.
during its movement there aren't friction points
accordance with the characteristic required by the
gear motor.
and that the metallic parts of the installation are
connected.
practicable.
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.
K
se glasses eep tHe protection
carter