Ariston Thermo ELECTRONIC 12 HP CA-E Instructions Pour L'installation Et L'entretien page 62

GB
HANDLING - TRANSPORT - PACKING
These operations must be carried out by professionally trained personnel.
Make sure that the lifting gear and slings are adequate for the weights to be lifted as shown
indicatively in the Table below.
Model
Weight 58,0 kg max.
PACKING
The water heater is packed using carton and
polystyrene foam (fi gure 18). To remove the
packing, remove the straps and then the
upper polystyrene cover, then remove the
carton protection and lift slightly the heater
to remove the polystyrene bottom (fi gure 19).
The packaging must be disposed of accor-
ding to the regulations in the country where
the heater is installed.
DEMOLITION AND DISPOSAL
The water heater does not contain any sub-
stances dangerous to human health or to
the environment as it is entirely manufactu-
red using materials that can be completely
recycled or normally disposed of.
ATTENTION
For demolition, call a specialised company or employ specifi cally trained personnel who are
aware of possible risks, know the contents of this Manual and apply them rigorously, are per-
fectly informed as to how the water heater operates and on its characteristics.
WIRING DIAGRAM
See fi gure 20
Legend:
A. Terminals for electricity supply connection
B. Main switch
C. Temperature control thermostat
D. Reset button
E. Lock-out signal lamp
F. Electronic control unit
G. Safety thermostat
H. Flue gas protector thermostat
62
All manuals and user guides at all-guides.com
12 P CA-E 16 P CA-E
69,0 kg max.
20 P CA-E 12 HP CA-E
77,0 kg max. 60,0 kg max.
18
I. Operation signal lamp
L. Gas valve
M. Detector electrode
N. Burner
O. Ignition electrode
P. Timer-thermostat (optional)
Q. Remote lock-out signal lamp (not supplied)
16 HP CA-E 20 HP CA-E
71,0 kg max. 77,0 kg max.
19