EINHELL TE-DA 18/760 Li Mode D'emploi page 11

18V 5.2Ah PXC Plus Lithium-Ion battery
18V 4.0Ah/6.0Ah PXC Plus Lithium-Ion battery
18V 5.0Ah/8.0Ah PXC Plus Lithium-Ion battery
18V PXC Dual Port Fast Charger
18V PXC Fast Charger
Contact your local retailer for more specifi c
models of batteries and charger available in your
area. You can also explore battery + charger
options at Einhell.com.
3. Intended use
The cordless drain auger is suitable for removing
blockages in domestic waste water pipes.
The equipment is allowed to be used only for its
prescribed purpose. Any other use is deemed to
be a case of misuse. The user/operator and not
the manufacturer will be liable for any damage or
injuries of any kind resulting from such misuse.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be voided
if the equipment is used in commercial, trade or
industrial businesses or for equivalent purposes.
4. Technical data
Motor power supply: ............................ 18V
No load RPM:.............................................. 0-560
Cable length .................................................25 ft.
Cable diameter ...............................................
Minimum pipe size (diameter) .........................
Maximum pipe size (diameter) ..................... 2-
Weight (Tool only): .....................................8.1 lbs
Wear ear-muff s.
The impact of noise can cause damage to
hearing.
Reduce noise generation and vibration to a
minimum!
•
Use only equipment that is in perfect
condition.
•
Maintain and clean the equipment regularly.
•
Adapt your way of working to the equipment.
•
Do not overload the equipment.
•
Have the equipment checked if necessary.
•
Switch off the equipment when not in use.
Anl_TE_DA_18_760_Li_SPK7_USA.indb 11 Anl_TE_DA_18_760_Li_SPK7_USA.indb 11
EN
CAUTION!
Residual risks
Even if you use this electric power tool in
accordance with the instructions, certain
residual risks cannot be eliminated. The
following hazards may arise in connection
with the equipment's construction and
layout:
1. Lung damage if no suitable protective dust
mask is used.
2. Damage to hearing if no suitable ear
protection is applied.
3. Health damage caused by hand-arm
vibrations if the equipment is used over a
longer period or is not properly guided and
maintained.
Limit the operating time.
All stages of the operating cycle must be
considered (for example, times in which the
electric tools are switched off and times in which
the tool is switched on but operates without load).
5. Before starting the equipment
Warning!
Always remove the battery before making
adjustments to the machine.
6. Operation
Warning!
To reduce the risk of injury, wear safety goggles
or glasses with side shields. Always wear leather
⁄ "
1
4
gloves.
⁄ "
5
8
⁄ "
1
6.1 Adjusting the direction of rotation and
4
movement of the cleaning coil (Fig. 2)
The machine has two controls for adjusting the
cleaning coil: the Forward/Neutral/Reverse lever
(2) and the direction of rotation switch (3).
The direction of rotation and movement of the
cleaning coil (1) will change depending on how
the controls are set.
- 11 -
14.07.2023 09:39:11 14.07.2023 09:39:11