Publicité
Les langues disponibles
Les langues disponibles
5.4. ON-Mode
When the switch is in the „ON" position, the camera switches to
real-time mode. At the same time, the camera starts working wit-
hout manual operation. When game or other objects enter the PIR
detection range, photos or videos are taken immediately.
When game moves out of the PIR detection range, the camera
switches off and goes into standby mode.
Description:
In general, it is recommended to place the camera at a height of 1
to 2 metres above the ground.
Note:
To avoid possible false triggering due to temperature and monito-
ring errors, do not point the camera at a heat source (e.g. the sun)
or near branches. Remove or near tree branches near the front of
the camera.
6. Advanced settings
The tracking camera is delivered with factory settings. You can
change the settings according to your needs, please make sure
the camera is in settings mode.
6.1. Advanced settings
Briefly press the „M" key to enter or exit the menu. Briefly press
the „▲/▼" key.
to move the cursor, briefly press the „◀/▶" button to change the
setting and briefly press the „E" button to confirm the change; re-
member to briefly press the „E" button to save the change, otherwi-
se the new setting will be lost.
19
Publicité
