Specifications - Sharp PN-R606 Manuel D'installation

Model
Power requirement
Operating temperature *
Operating humidity
Power consumption
Dimensions
(excluding protrusions)
Weight
Model
Power requirement
Operating temperature *
Operating humidity
Power consumption
Dimensions
(excluding protrusions)
Weight
* When using the monitor laying flat on a surface (when the monitor is tilted more than 20 degrees upward or downward from the perpendicular
in relation to a level surface), use the monitor at a temperature between 32°F (0°C) to 86°F (30°C).
Temperature condition may change when using the monitor together with the optional equipments recommended by SHARP. In such
cases, please check the temperature condition specified by the optional equipments.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement
without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from
these values in individual units.
8
E

Specifications

PN-R706
AC 100 - 240 V, 2.6 A, 50/60 Hz
32°F to 104°F (0°C to 40°C)
20% to 80% (no condensation)
230 W
inch (mm) Approx. 62-3/16 (W) x 2-9/16 (D) x
36-1/8 (H) (1579 x 65 x 918)
lbs. (kg) Approx. 99.3 (45)
PN-R556
AC 100 - 240 V, 2.0 A,
50/60 Hz
32°F to 104°F (0°C to 40°C)
20% to 80% (no condensation)
175 W
inch (mm) Approx. 48-7/16 (W) x
2-1/4 (D) x 27-5/8 (H)
(1231 x 57 x 702)
lbs. (kg) Approx. 55.1 (25)
PN-R606
AC 100 - 240 V, 2.2 A, 50/60 Hz
190 W
Approx. 53-1/8 (W) x 2-3/8 (D) x 30-1/2 (H)
(1349 x 60 x 775)
Approx. 72.8 (33)
PN-R496 PN-R426
AC 100 - 240 V, 1.8 A, AC 100 - 240 V, 1.5 A,
50/60 Hz 50/60 Hz
155 W 135 W
Approx. 43-1/8 (W) x Approx. 37-3/8 (W) x
2-1/4 (D) x 24-5/8 (H) 2-1/4 (D) x 21-3/8 (H)
(1095 x 57 x 626) (949 x 57 x 543.5)
Approx. 43 (19.5) Approx. 34.2 (15.5)