Klarstein 10030015 Mode D'emploi page 8

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Technical Data 8
Safety Instructions 8
Product Description 9
Use and Operation 10
Cleaning and Care 12
Hints on Disposal 13
Declaration od Conformity 13
Item number
Power supply
• Read all instructions.
• Before using check that the voltage power corresponds to the one shown on the appliance nameplate.
• Do not let cord hang over edge of table or counter.
• Do not place on or near a hot gas or electric burner, or in a heated oven.
• Do not operate any appliance with a damage cord or plug or after the appliance malfunction or has been
damaged in any manner. Return the appliance to the nearest authorized service facility for examination,
repair or adjustment.
• If the supply cord is damaged it must be replaced by the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard .
• Avoid contacting moving parts.
• Do not leave foreign objects, such as spoons, forks, knives or the measuring cup, in the jar as this will damage
the blades and other components when starting the machine and may cause injury.
• Blades are sharp, so handle carefully.
• The use of attachment, including jar, jar lid, not recommended or sold by manufacturer may cause fire,
electric shock or injury.
• The jar should not be more than 2/3 full when the tamper is left in while blending. Do not exceed 30 se-
conds of continuous blending with the tamper in place.
• When making nut butters or oil based foods, do not process for more than one minute after the mixture
starts circulating. Over-processing can cause dangerous overheating.
• When blending hot liquids or ingredients, use caution: spray or escaping steam may cause scalding and
burns. Do not fill container to the maximum capacity. Always begin processing on the lowest speed setting.
Keep hands and other exposed skin away from the lid opening to prevent possible burns.
All manuals and user guides at all-guides.com
Contents
Technical Data
10030015
220-240 V ~ 50-60 Hz
Safety Instructions
8