Klarstein 10030015 Mode D'emploi page 12

Important Hints on Grinding
• During operation, if the coffee powder is too thick to be grinded, operate by referring to the description of
"Tamper" mentioned above. You' d better not remove the jar from the motor unit during working process. If it
is necessary to remove the jar, please firstly turn off the appliance to make it stop working and then remove it.
• The max operation time per time shall not exceed 1 minute and minimum 10 minutes rest time must be main-
tained between two consecutive cycles. And the appliance must rest for at least 30 minutes every 10 cycles.
• After finish working, move the jar out of the jar support pad, and then carefully take down the measuring cup
and jar lid, then pour and serve. The speed dial and power switch must be at "OFF" positions and the power
outlet must be unplugged before removing the jar.
Making Soup
1. Lay the appliance on the flat horizontal surface and make sure it is unplugged.
2. Remove the measuring cup and jar lid, and then put the required ingredients into the jar and fill the jar
with appropriate amount of room-temperature purified water. The amount of mixture should not exceed
1000ml. And then close the jar lid and measuring cup well in position.
3. Connect the appliance with power source, and then push the power switch to "ON" position.
4. Push the function switch to "Soup" setting and the appliance starts to make soup.
5. The machine runs slowly at the first 15 seconds and will accelerate when detecting food.
6. After cooking for about 6 minutes, turn the speed dial to "OFF" position, and the appliance stops working.
Important Hints on Making Soup
• During operation, if the soup is too thick and hard to be processed, operate by referring to the description of
"Tamper" mentioned above.
• You' d better not remove the jar from the motor unit during working process. If it is necessary to remove the
jar, please firstly turn off the appliance to make it stop working and then remove it.
• The max operation time per time shall not exceed 6 minutes and minimum 5 minutes rest time must be main-
tained between two consecutive cycles. And the appliance must rest for at least 30 minutes every 10 cycles.
• After finish working, move the jar out of the jar support pad, and then carefully take down the measuring cup
and jar lid, then pour and serve. CAUTION: The speed dial and power switch must be at "OFF" positions and
the power outlet must be unplugged before removing the jar.
The Auto-Clean feature can help to clean the blender and blade assembly easily and rapidly in complete safety.
• After use, reassemble the jar and pour about 400-500ml warm water into it and turn the speed dial to "HI"
speed or push the function switch to "Pulse" position to work for a few seconds to remove the residual food.
• After stop, remove the jar from the motor unit and rinse the jar under running water.
• Wiping the outer surface of motor unit with a damp cloth, do not use abrasive cleansers. Never immerse in
water or other solution for cleaning.
All manuals and user guides at all-guides.com
Cleaning and Care
12