Publicité
Les langues disponibles
Les langues disponibles
Setup
Delay Time
If the speakers cannot be placed at equal distances from
the listening position, you can adjust the delay time of the
audio signals from the Center and Surround speakers.
You can also set the Test Tone in this mode.
Setting up the Speaker Delay Time
When 5.1CH Surround Sound is played, you can
enjoy the best sound if the distance between you
and each speaker is the same.
Since the sounds arrive at the listening position at
different times depending on the placement of
speakers, you can adjust this difference by adding a
delay effect to the Center and Surround Speakers.
Settings
Delay Time
Front
Center
Surround
Subwoofer
Test Tone
<Change " Select ' Return
mmove " Select ' Return
Test Tone
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
mMove " Select ' Return
Use the Test Tone feature to check the speaker
connections.
• Press the _+ buttons to select On.
• The test tone will be sent to Front Left ➞ Center
➞ Front Right ➞ Surround Right ➞ Surround
Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.
20
English
All manuals and user guides at all-guides.com
DRC (Dynamic Range Compression)
This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
• You can select either Full, 6/8, 4/8, 2/8, off.
AUDIO SYNC
Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
• You can set the audio delay time between 0 mSec
User EQ
You can configure the equalizer settings manually to
your preference.
: 00ms
: 00ms
: Off
: On
▶
Initial Settings
" Select ' Return
By using the Initial Settings, you can set the language and
TV aspect.
DivX(R) Registration
View DivX(R) VOD Registration Code to purchase
and play DivX(R) VOD content.
and 300 mSec. Set it to the optimal status.
Settings
User EQ
dB
6
·
·
·
·
·
·
·
·
·
·
·
·
-6
250Hz
600Hz
1kHz
3kHz
a Reset > Adjust < Move ' Return
mMove " Select ' Return
System
6kHz
10kHz 15kHz
Publicité
