Publicité
Les langues disponibles
Les langues disponibles
Display
You can configure various display options such as
the TV Aspect, Resolution, etc.
TV Aspect
Depending on the type of television you have, you
may want to adjust the screen setting.
• 4:3 Pan-Scan
Select when you want to see the 16:9
video supplied by the DVD without the
black bars on top and bottom, even
though you have a TV with a 4:3 ratio
screen(extreme left and right portion of
the movie picture will be cut off).
• 4:3 Letter Box
Select when you want to see the total
16:9 ratio screen DVD supplies, even
though you have a TV with a 4:3 ratio
screen. Black bars will appear at the
top and bottom of the screen.
• 16:9 Wide
You can view the full 16:9 picture on
your widescreen TV.
✎
NOTE
`
If a DVD is in the 4:3 ratio, you cannot view it in the wide screen.
`
Since DVD discs are recorded in various image formats, they will
look different depending on the software, the type of TV, and the
TV aspect ratio setting.
Video Out Signal
Different countries apply different TV standard.
You can select from NTSC or PAL.
• NTSC : You can select the NTSC video format
• PAL : You can select the PAL video format
Audio
Speaker Setting
Speaker Size
You can set the Speaker Size of the Center and Surround
Speakers, as well as Test Tone in this mode.
All manuals and user guides at all-guides.com
Settings
Speaker Setting
Speaker Size
Sound Edit
Delay Time
Test Tone
mMove " Select ' Return
• For the Front, the mode is set to Small.
• For the Subwoofer, the mode is set to Present.
• For the Center and Surround, you can switch the
mode to Small or None.
- Small : Select this when using the speakers.
- None : Select this when no speaker is
connected.
✎
NOTE
`
The speaker mode may vary depending on the
Dolby Pro Logic and Stereo settings.
Sound Edit
You can adjust the balance and level for each speaker.
Settings
Sound Edit
Front Bal.
dB
L
Surround Bal.
dB
L
Center Level
Surround Level
SW Level
<Change " Select ' Return
mMove " Select ' Return
Press the ▲▼ buttons to select and adjust the
desired speaker.
Press the _+ buttons to adjust the settings.
Adjusting Front/Surround Bal.
`
You can select between 0 and -6.
`
The volume decreases as you move closer to –6.
Adjusting Center/Surround/Subwoofer Level
`
The volume level can be adjusted in steps from
+6dB to –6dB.
`
The sound gets louder as you move closer to +6dB
and quieter as you get closer to -6dB.
▶
: Off
" Select ' Return
R
dB
R
dB
dB
dB
dB
19
English
Publicité
